2. CONTINUOS THREE BEEPS
3. THREE BEEPS ( 1 Long 2 Short)
4. THREE LONG BEEPS PERIOD WISE
5. CONTINUOS NON-STOP BEEPING
6. FDD LED IS GLOWING CONTINUOSLY
7. NO DISPLAY ON THE SCREEN AT ALL
8. POWER LED IS OFF
9. SHOWING CMOS ERROR
10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
11. SHOWING HDD ERROR OR HARD DISK FAILURE
12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
13. DANCING SCREEN
14. SHAKING SCREEN
15. CPU CABINET SHOCK
16. NON-SYSTEM DISK ERROR
17. MISSING OPERATING SYSTEM
18. MISSING COMMAND INTERPRETOR
19. SHOWING I/O ERROR
20. SHOWING DIVIDE OVER- FLOW MESSAGE
21. HARD DISK MAKING NOISE WHILE PROCESSING
22. HARD DISK HANGS WHILE PROCESSING
23. HARD DISK NOT DETECTED
24. PARTITION NOT SHOWN
25. MMX/DLL FILE MISSING
26. WINDOWS REGISTRY ERROR
27. DISPLAY COLOUR DOES NOT MATCH
28. UNKNOWN DEVICE FOUND
1. MONITOR LED IS BLINKING
Check all the connections like Monitor Cable, Data cables,RAM, Display Card , CPU connections.
Top
2. CONTINUOS THREE BEEPS
Problem in RAM Connection.
Top
3. THREE BEEPS ( 1 Long 2 Short)
Problem in Display Card Connection
Top
4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output System)
Top
5. CONTINUOS NON-STOP BEEPING
Key Board Problem (I.e.; Some Key is pressed for Longer time)
Top
6. FDD LED IS GLOWING CONTINUOSLY
Data cable to be connected properly (twisted cable).
Top
7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply) and then Restart.
Top
8. POWER LED IS OFF
a. Check main power cord
b. Check S.M.P.S.
c. Check Mother Board connection
Top
9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set Original Settings Manually.(Refer CMOS Setup chart)
Top
10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.
Top
11. SHOWING HDD ERROR OR HARD DISK FAILURE
a. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto detecting Setting Partitions by Fdisk Command, then format it to set track 0.
Top
12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
a. Check S.M.P.S
b. RAM not functioning properly.
c. Software problem (due to using pirated software)
d. CPU fan not functioning properly.
Top
13. DANCING SCREEN
a. Check Display card connection
b. Virus Problem
c. Video Memory Problem
Top
14. SHAKING SCREEN
a. Earthing problem
b. Magnetic waves comes around.
Top
15. CPU CABINET SHOCK
a. Check Earthing
b. Check main power cord.
Top
16. NON-SYSTEM DISK ERROR
a. Floppy Drive having different disk (Non-Bootable Disk) OR CMOS Parameters for Hard Disk may not be set properly.
b. Hard Disk Partitions may not be created.
c. Hard Disk may not be formatted.
Top
7. MISSING OPERATING SYSTEM
The System files missing namely Ie; command.com} - User File IO.SYS & MS_DOS.SYS } - Hidden Files. These above three files required for Start up of the system that can be transferred by using SYS C: Command OR While the time of formatting by using Format c:/u/s
Top
18. MISSING COMMAND INTERPRETOR
May the file Command.com is corrupted OR Infected by Virus OR Some one has Erased it.
Top
19. SHOWING I/O ERROR
a. The type of Hard Disk in CMOS may not be set properly.
b. Operating system used for formatting is not valid
Top
20. SHOWING DIVIDE OVER- FLOW MESSAGE
a. May some Directories or Files crash with other files.
b. Use CHKDSK/F or SCANDISK Command to correct it.
Top
21. HARD DISK MAKING NOISE WHILE PROCESSING
a. Unstabilized power supply.
b. Check for Loose Contact.
c. Do not use Y Connectors for Hard Disk.
d. It may create Bad Sector OR Weak Hard Disk.
Top
22. HARD DISK HANGS WHILE PROCESSING
Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)
Top
23. HARD DISK NOT DETECTED
a. Check Power Connector
b. Check Data Cables
c. Check Jumpers
Top
24. PARTITION NOT SHOWN
Operating System where the Hard Disk formatted is not supported with present Mother Board. For Eg: Hard Disk formatted with Pentium System will hide their partitions for 486 System.
Top
25. MMX/DLL FILE MISSING
May the above files may be corrupted due to power failure or Virus. Make available above files from other Computer. OR Reinstall Windows 98 Operating System. (This procedure will not make any effect on existing Data).
Top
26. WINDOWS REGISTRY ERROR
This will happen due to sudden ON/OFF of the system. Final solution is to Reinstall Operating System.
Top
27. DISPLAY COLOUR DOES NOT MATCH
a. Configure Display Card properly with their CD.
b. The Standard setting for Windows is set it to 800x600 for better performance.
Top
28. UNKNOWN DEVICE FOUND
May the Driver utility is not provided with operating system . Insert Driver CD and install software for the above Device. (Every Device requires driver utility to set active)
Top
